I have posted this previously to this website, but I've made a few enhancements to it, so I'll post it again. This is my script to run a Security Audit for an instance. Runs for all databases, unless you put a specific database in the WHERE clause of the appropriate SELECT.
It creates either columnar output, or actual assignment statements. Set the @outputtype variable to whichever is needed.
In that same area, you can set whether to include the object level permissions, and the role information.
It's not the cleanest or the fastest, but it does a really good job for what I needed.
Uses print, so go to the messages tab in the output in Management Studio. Can run as output to file so prints directly to a file, especially useful if a lot of databases, or a lot of permissions.
Here is the script. Hope it helps.
/* ====================================================================================================================== */
/* Instance Security Audit Documentation */
/* Runs for all databases, unless a specific database is used in the WHERE clause below */
/* */
/* By VikingDBA 12/28/2011 */
/* ====================================================================================================================== */
Use MASTER
SET NOCOUNT ON
/* ==================================================================================================================== */
-- Security Audit for SERVER Roles
DECLARE @sr varchar(100)
DECLARE @mn varchar(150)
DECLARE @cmd varchar(4000)
DECLARE @col1nm varchar(200)
DECLARE @col2nm varchar(200)
DECLARE @col3nm varchar(200)
DECLARE @col4nm varchar(200)
DECLARE @col5nm varchar(200)
DECLARE @col6nm varchar(200)
DECLARE @col7nm varchar(200)
DECLARE @col8nm varchar(200)
DECLARE @col9nm varchar(200)
DECLARE @col10nm varchar(200)
DECLARE @col11nm varchar(200)
DECLARE @col12nm varchar(200)
DECLARE @col13nm varchar(200)
DECLARE @col14nm varchar(200)
DECLARE @col15nm varchar(200)
DECLARE @col16nm varchar(200)
DECLARE @col17nm varchar(200)
DECLARE @col18nm varchar(200)
DECLARE @col19nm varchar(200)
DECLARE @col20nm varchar(200)
DECLARE @col1len int
DECLARE @col2len int
DECLARE @col3len int
DECLARE @col4len int
DECLARE @col5len int
DECLARE @col6len int
DECLARE @col7len int
DECLARE @col8len int
DECLARE @col9len int
DECLARE @col10len int
DECLARE @col11len int
DECLARE @col12len int
DECLARE @col13len int
DECLARE @col14len int
DECLARE @col15len int
DECLARE @col16len int
DECLARE @col17len int
DECLARE @col18len int
DECLARE @col19len int
DECLARE @col20len int
DECLARE @rn varchar(200)
DECLARE @un varchar(200)
DECLARE @ut varchar(200)
DECLARE @sd varchar(200)
DECLARE @pn varchar(200)
DECLARE @SN varchar(200)
DECLARE @on varchar(200)
DECLARE @pd varchar(200)
DECLARE @sdmax int
DECLARE @pnmax int
DECLARE @snmax int
DECLARE @onmax int
DECLARE @pdmax int
DECLARE @unmax int
DECLARE @rnmax int
DECLARE @utmax int
DECLARE @outputtypeint
DECLARE @prodlevel varchar(25)
DECLARE @versionvarchar(250)
DEClARE @prodvervarchar(50)
DECLARE @editionvarchar(50)
DECLARE @includeobjlvlpermsbit
DECLARE @includeroleinfobit
SET @outputtype = 1-- 1=columnar 2=assignment statements
SET @includeobjlvlperms = 1
SET @includeroleinfo = 1
SELECT @prodlevel=CONVERT(varchar(25),SERVERPROPERTY('ProductLevel'))
SELECT @version=CONVERT(varchar(250),@@VERSION)
SELECT @prodver=CONVERT(varchar(50),SERVERPROPERTY('ProductVersion'))
SELECT @edition=CONVERT(varchar(50),SERVERPROPERTY('Edition'))
/* ============================================================================ */
--Find split out line
DECLARE @lvaltousevarchar(2000)
DECLARE @lvallengthint
DECLARE @lvalctint
DECLARE @spotcatint
DECLARE @spotcatvalint
DECLARE @lval1varchar(2000)
DECLARE @lval2varchar(2000)
DECLARE @lval3varchar(2000)
DECLARE @lval4varchar(2000)
DECLARE @lval5varchar(2000)
DECLARE @lval6varchar(2000)
SET @lvaltouse = @version
SET @lvallength = LEN(@lvaltouse)
SET @lvalct = 1
SET @spotcat = 1
SET @lval1 = ''
SET @lval2 = ''
SET @lval3 = ''
SET @lval4 = ''
SET @lval5 = ''
SET @lval6 = ''
WHILE @spotcat <= @lvallength
BEGIN
SET @spotcatval = ASCII(SUBSTRING(@lvaltouse,@spotcat,1))
if @spotcatval = 10-- value we are looking for
SET @lvalct = @lvalct + 1-- set to go to the next line and start building it
else-- add to current value line
BEGIN
if @spotcatval <> 9-- values we are wanting to exclude
BEGIN
if @lvalct = 1
SET @lval1 = @lval1 + CHAR(@spotcatval)
if @lvalct = 2
SET @lval2 = @lval2 + CHAR(@spotcatval)
if @lvalct = 3
SET @lval3 = @lval3 + CHAR(@spotcatval)
if @lvalct = 4
SET @lval4 = @lval4 + CHAR(@spotcatval)
if @lvalct = 5
SET @lval5 = @lval5 + CHAR(@spotcatval)
if @lvalct = 6
SET @lval6 = @lval6 + CHAR(@spotcatval)
END
END
SET @spotcat = @spotcat + 1
END
--PRINT 'Line to split=' + @lvaltouse
--PRINT 'line1 = ' + @lval1
--PRINT 'line2 = ' + @lval2
--PRINT 'line3 = ' + @lval3
--PRINT 'line4 = ' + @lval4
--PRINT 'line5 = ' + @lval5
--PRINT 'line6 = ' + @lval6
/* ============================================================================= */
PRINT '============================================================================================================='
PRINT ' Security Audit For Server Instance ' + CONVERT(varchar(128),@@servername)
if @outputtype = 2
PRINT ' Assignment Statements'
PRINT ' For ' + CONVERT(varchar(128),getdate(),101) + ' ' + CONVERT(varchar(128),getdate(),108)
PRINT '============================================================================================================='
PRINT 'SQL Server Version: ' + @lval1
PRINT ' ' + @lval4
PRINT '============================================================================================================='
PRINT 'NOTE: Make sure to get list of logins using the sp_help_revlogin stored procedure in the master database.'
PRINT '============================================================================================================='
PRINT ' Server Role Security Settings'
PRINT ' '
PRINT ' '
CREATE TABLE #rolememberdummy
(ServerRole varchar(100),
MemberName varchar(150),
MemberSID varchar(2000)
)
CREATE TABLE #dummyDBPerms
(StateDescvarchar(200),
PermNamevarchar(200),
SchemaNamevarchar(200),
ObjectNamevarchar(200),
UserNamevarchar(200),
ObjectTypevarchar(200),
UserTypevarchar(200)
)
-- Security Audit
INSERT INTO #rolememberdummy
EXEC sp_helpsrvrolemember 'sysadmin'
INSERT INTO #rolememberdummy
EXEC sp_helpsrvrolemember 'securityadmin'
INSERT INTO #rolememberdummy
EXEC sp_helpsrvrolemember 'serveradmin'
INSERT INTO #rolememberdummy
EXEC sp_helpsrvrolemember 'dbcreator'
INSERT INTO #rolememberdummy
EXEC sp_helpsrvrolemember 'diskadmin'
INSERT INTO #rolememberdummy
EXEC sp_helpsrvrolemember 'processadmin'
INSERT INTO #rolememberdummy
EXEC sp_helpsrvrolemember 'setupadmin'
INSERT INTO #rolememberdummy
EXEC sp_helpsrvrolemember 'bulkadmin'
SET @col1nm = 'Role'
SET @col1len = 20
SET @col2nm = ''
SET @col2len = 8
SET @col3nm = 'Member Name'
SET @col3len = 30
PRINT @col1nm + SPACE(@col1len-len(@col1nm)) + SPACE(@col2len) + @col3nm
PRINT REPLICATE('=',@col1len) + SPACE(@col2len) + REPLICATE('=',@col3len)
--SELECT CONVERT(varchar(30),ServerRole) as ServerRole, CONVERT(varchar(30),MemberName) AS MemberName FROM #rolememberdummy
DECLARE backupFiles CURSOR FOR
SELECT ServerRole, MemberName FROM #rolememberdummy
OPEN backupFiles
-- Loop through all the files for the database
FETCH NEXT FROM backupFiles INTO @sr, @mn
WHILE @@FETCH_STATUS = 0
BEGIN
SET @col1nm = @sr
SET @col1len = 20
SET @col2nm = ''
SET @col2len = 8
SET @col3nm = @mn
SET @col3len = 30
PRINT @col1nm + SPACE(@col1len-len(@col1nm)) + SPACE(@col2len) + @col3nm
FETCH NEXT FROM backupFiles INTO @sr, @mn
END
CLOSE backupFiles
DEALLOCATE backupFiles
DROP TABLE #rolememberdummy
PRINT ' '
PRINT ' '
PRINT '==========================================================================================================='
PRINT ' Information By Database'
PRINT ' '
PRINT ' '
CREATE TABLE #DummyDBDesc
(RecIDintIDENTITYNOT NULL,
ServerNamevarchar(128)NULL,
DBNamevarchar(100)NULL,
RecoveryModelvarchar(10)NULL,
CompatibilityLevelvarchar(30)NULL,
ReadWriteDescvarchar(10)NULL
)
CREATE TABLE #dummyDBRoles
(RoleNamevarchar(200),
UserNamevarchar(200),
UserTypevarchar(200)
)
CREATE TABLE #dummyDBUsers
(UserNamevarchar(200),
UserTypevarchar(200)
)
INSERT INTO #DummyDBDesc
select CONVERT(varchar(128),@@servername) AS ServerName, CONVERT(varchar(100),name) as DBName, CONVERT(varchar(10),recovery_model_desc) as RecoveryModel,--database_id,
CASE compatibility_level
WHEN 80 THEN CONVERT(varchar(4),compatibility_level) + ' - SQL 2000 *'
WHEN 90 THEN CONVERT(varchar(4),compatibility_level) + ' - SQL 2005'
WHEN 100 THEN CONVERT(varchar(4),compatibility_level) + ' - SQL 2008'
WHEN 105 THEN CONVERT(varchar(4),compatibility_level) + ' - SQL 2008 R2'
WHEN 110 THEN CONVERT(varchar(4),compatibility_level) + ' - Denali'
ELSE CONVERT(varchar(4),compatibility_level)
END AS CompatibilityLevel,
CASE is_read_only
WHEN 0 THEN CONVERT(varchar(10),'RW')
ELSE CONVERT(varchar(10),'R')
END as ReadWriteDesc
FROM sys.databases
WHERE name NOT IN('tempdb','master','msdb','model') and name NOT LIKE '%ReportServer%'
--AND name = 'MyDatabase'
ORDER BY name
DECLARE backupFiles CURSOR FOR
SELECT DBName, RecoveryModel, CompatibilityLevel, ReadWriteDesc FROM #DummyDBDesc ORDER BY DBName
OPEN backupFiles
DECLARE @DBN varchar(100)
DECLARE @rm varchar(10)
DECLARE @cl varchar(30)
DECLARE @rwd varchar(10)
-- Loop through all the files for the database
FETCH NEXT FROM backupFiles INTO @DBN, @rm, @cl, @rwd
WHILE @@FETCH_STATUS = 0
BEGIN
PRINT 'Database Name : ' + @DBN
PRINT 'Recovery Model : ' + @rm
PRINT 'Compatibility Level: ' + @cl
PRINT 'Read/Write : ' + @rwd
PRINT ' '
PRINT ' '
/* ================================================================================================================================================================= */
/* Database User Information */
--Start with a clean table to load the values
TRUNCATE TABLE #dummyDBUsers
-- Get roles for this database and load into the temp table
SET @cmd = 'USE [' + @DBN + ']; INSERT INTO #dummyDBUsers SELECT CONVERT(varchar(100),name) AS UserName, CONVERT(varchar(100),type_desc) as UserType FROM sys.database_principals WHERE (type = ''S'' OR type = ''U'' OR type = ''G'') AND is_fixed_role = 0 AND (name NOT IN (''guest'',''dbo'',''INFORMATION_SCHEMA'',''sys''))'
--PRINT @cmd
EXEC (@cmd)
--Get the length of the longest occurance of the columns
SELECT @unmax = ISNULL(MAX(len(UserName)),0) FROM #dummyDBUsers
SELECT @utmax = ISNULL(MAX(len(UserType)),0) FROM #dummyDBUsers
--Set some minimum values so column doesn't print short
if @unmax < 25 SET @unmax = 25
if @utmax < 25 SET @utmax = 25
--Set and print the column headings for the role information
SET @col1nm = 'UserName'
SET @col1len = @unmax
SET @col2nm = ''
SET @col2len = 5
SET @col3nm = 'UserType'
SET @col3len = @utmax
PRINT ' '
PRINT SPACE(10) + @col1nm + SPACE(@col1len-len(@col1nm)) + SPACE(@col2len) + @col3nm + SPACE(@col3len-len(@col3nm))
PRINT SPACE(10) + REPLICATE('=',@col1len) + SPACE(@col2len) + REPLICATE('=',@col3len)
DECLARE backupFiles2 CURSOR FOR
SELECT UserName, UserType FROM #dummyDBUsers ORDER BY UserName
OPEN backupFiles2
-- Loop through all the files for the database
FETCH NEXT FROM backupFiles2 INTO @un, @ut
WHILE @@FETCH_STATUS = 0
BEGIN
--Set and print the row details for the role information
SET @col1nm = SUBSTRING(@un,1,@unmax)
SET @col3nm = SUBSTRING(@ut,1,@utmax)
PRINT SPACE(10) + @col1nm + SPACE(@col1len-len(@col1nm)) + SPACE(@col2len) + @col3nm + SPACE(@col3len-len(@col3nm))
FETCH NEXT FROM backupFiles2 INTO @un, @ut
END
CLOSE backupFiles2
DEALLOCATE backupFiles2
PRINT ' '
PRINT ' '
if @includeroleinfo = 1
BEGIN
/* ================================================================================================================================================================= */
/* Role Information */
--Start with a clean table to load the values
TRUNCATE TABLE #dummyDBRoles
-- Get roles for this database and load into the temp table
SET @cmd = 'USE [' + @DBN + ']; INSERT INTO #dummyDBRoles select CONVERT(varchar(200),roles.name) AS RoleName, CONVERT(varchar(200),members.name) AS UserName, CONVERT(varchar(200),members.type_desc) AS UserType from sys.database_principals members inner join sys.database_role_members drm on members.principal_id = drm.member_principal_id inner join sys.database_principals roles on drm.role_principal_id = roles.principal_id where members.name <> ''dbo'' ORDER BY members.name, roles.name'
--PRINT @cmd
EXEC (@cmd)
-- Now add in any roles that are present in the database that do not have anyone assigned to them (those that are already in the temp table)
SET @cmd = 'USE [' + @DBN + ']; INSERT INTO #dummyDBRoles SELECT CONVERT(varchar(200),name) AS RoleName, ''--none--'' As UserName, '''' AS UserType FROM sys.database_principals SQL_Latin1_General_CP1_CI_AS WHERE type = ''R'' and is_fixed_role = 0 and name <> ''public'' AND (name NOT IN (SELECT RoleName FROM #dummyDBRoles))'
--PRINT @cmd
EXEC (@cmd)
--Get the length of the longest occurance of the columns
SELECT @rnmax = ISNULL(MAX(len(RoleName)),0) FROM #dummyDBRoles
SELECT @unmax = ISNULL(MAX(len(UserName)),0) FROM #dummyDBRoles
SELECT @utmax = ISNULL(MAX(len(UserType)),0) FROM #dummyDBRoles
--Set some minimum values so column doesn't print short
if @rnmax < 25 SET @rnmax = 25
if @unmax < 25 SET @unmax = 25
if @utmax < 25 SET @utmax = 25
--Set and print the column headings for the role information
SET @col1nm = 'RoleName'
SET @col1len = @rnmax
SET @col2nm = ''
SET @col2len = 5
SET @col3nm = 'UserName'
SET @col3len = @unmax
SET @col4nm = ''
SET @col4len = 5
SET @col5nm = 'UserType'
SET @col5len = @utmax
PRINT ' '
PRINT SPACE(10) + @col1nm + SPACE(@col1len-len(@col1nm)) + SPACE(@col2len) + @col3nm + SPACE(@col3len-len(@col3nm)) + SPACE(@col4len) + @col5nm + SPACE(@col5len-len(@col5nm))
PRINT SPACE(10) + REPLICATE('=',@col1len) + SPACE(@col2len) + REPLICATE('=',@col3len) + SPACE(@col4len) + REPLICATE('=',@col5len)
-- Print the script to set the database context
if @outputtype = 2
BEGIN
PRINT 'USE ' + @DBN
PRINT 'GO'
PRINT ' '
END
--statement to get all roles for this database
--SELECT name FROM sys.database_principals WHERE type = 'R' and is_fixed_role = 0 and name <> 'public'
--can use to script the CREATE ROLE statements
-- Now loop through the roles
DECLARE backupFiles2 CURSOR FOR
SELECT RoleName, UserName, UserType FROM #dummyDBRoles ORDER BY RoleName
OPEN backupFiles2
-- Loop through all the files for the database
FETCH NEXT FROM backupFiles2 INTO @rn, @un, @ut
WHILE @@FETCH_STATUS = 0
BEGIN
--Set and print the row details for the role information
SET @col1nm = SUBSTRING(@rn,1,@rnmax)
SET @col3nm = SUBSTRING(@un,1,@unmax)
SET @col5nm = SUBSTRING(@ut,1,@utmax)
if @outputtype = 1
PRINT SPACE(10) + @col1nm + SPACE(@col1len-len(@col1nm)) + SPACE(@col2len) + @col3nm + SPACE(@col3len-len(@col3nm)) + SPACE(@col4len) + @col5nm + SPACE(@col5len-len(@col5nm))
if @outputtype = 2
BEGIN
if @col3nm <> '--none--'
PRINT 'exec sp_addrolemember [' + @col1nm + '], [' + @col3nm + '] --Usertype= ' + @col5nm
else
PRINT SPACE(10) + @col1nm + SPACE(@col1len-len(@col1nm)) + SPACE(@col2len) + @col3nm + SPACE(@col3len-len(@col3nm)) + SPACE(@col4len) + @col5nm + SPACE(@col5len-len(@col5nm))
END
FETCH NEXT FROM backupFiles2 INTO @rn, @un, @ut
END
CLOSE backupFiles2
DEALLOCATE backupFiles2
PRINT ' '
PRINT ' '
END
if @includeobjlvlperms = 1
BEGIN
/* ================================================================================================================================================================= */
/* Object-Level Permissions Information */
--Start with a clean table to load the values
TRUNCATE TABLE #dummyDBPerms
-- Get permissions for this database and load into the temp table
-- I'm sure some of this part came from elsewhere. My appologies to the originator.
SET @cmd = 'USE [' + @DBN + ']; INSERT INTO #dummyDBPerms '
SET @cmd = @cmd + 'select p.state_desc, p.permission_name, s.name, o.name, u.name, CASE o.type WHEN ''P'' THEN ''SPROC''
WHEN ''V'' THEN ''View''
WHEN ''U'' THEN ''Table''
WHEN ''FN'' THEN ''Function (scaler)''
WHEN ''TF'' THEN ''Function (table-valued)''
ELSE o.type_desc END AS ObjectType,
CONVERT(varchar(200),u.type_desc) AS UserType
from sys.database_permissions p
inner join sys.objects o on p.major_id = o.object_id
inner join sys.schemas s on s.schema_id = o.schema_id
inner join sys.database_principals u on p.grantee_principal_id = u.principal_id
ORDER BY o.type, o.name collate Latin1_general_CI_AS, u.name collate Latin1_general_CI_AS'
--PRINT @cmd
EXEC (@cmd)
--Get the length of the longest occurance of each of the columns
SELECT @sdmax = ISNULL(MAX(len(StateDesc)),0) FROM #dummyDBPerms
SELECT @pnmax = ISNULL(MAX(len(PermName)),0) FROM #dummyDBPerms
SELECT @snmax = ISNULL(MAX(len(SchemaName)),0) FROM #dummyDBPerms
SELECT @onmax = ISNULL(MAX(len(ObjectName)),0) FROM #dummyDBPerms
SELECT @unmax = ISNULL(MAX(len(UserName)),0) FROM #dummyDBPerms
SELECT @pdmax = ISNULL(MAX(len(ObjectType)),0) FROM #dummyDBPerms
SELECT @utmax = ISNULL(MAX(len(UserType)),0) FROM #dummyDBPerms
--Set some minimum values so column doesn't print short
if @sdmax < 15 SET @sdmax = 15
if @pnmax < 15 SET @pnmax = 15
if @snmax < 10 SET @snmax = 10
if @onmax < 15 SET @onmax = 15
if @unmax < 15 SET @unmax = 15
if @pdmax < 15 SET @pdmax = 15--ObjectType
if @utmax < 15 SET @utmax = 15--UserType
--Set and print the column headings for the permissions information
SET @col1nm = 'StateDesc'
SET @col1len = @sdmax
SET @col2nm = ''
SET @col2len = 5
SET @col3nm = 'PermName'
SET @col3len = @pnmax
SET @col4nm = ''
SET @col4len = 5
SET @col5nm = 'Schema'
SET @col5len = @snmax
SET @col6nm = ''
SET @col6len = 5
SET @col7nm = 'Object'
SET @col7len = @onmax
SET @col8nm = ''
SET @col8len = 5
SET @col9nm = 'User'
SET @col9len = @unmax
SET @col10nm = ''
SET @col10len = 5
SET @col11nm = 'ObjectType'
SET @col11len = @pdmax
SET @col12nm = ''
SET @col12len = 5
SET @col13nm = 'UserType'
SET @col13len = @utmax
PRINT ' '
PRINT SPACE(10) + @col1nm + SPACE(@col1len-len(@col1nm)) + SPACE(@col2len) + @col3nm + SPACE(@col3len-len(@col3nm)) + SPACE(@col4len)+ @col5nm + SPACE(@col5len-len(@col5nm)) + SPACE(@col6len)+ @col7nm + SPACE(@col7len-len(@col7nm)) + SPACE(@col8len) + @col9nm + SPACE(@col9len-len(@col9nm)) + SPACE(@col10len) + @col11nm + SPACE(@col11len-len(@col11nm)) + SPACE(@col12len) + @col13nm + SPACE(@col13len-len(@col13nm))
PRINT SPACE(10) + REPLICATE('=',@col1len) + SPACE(@col2len) + REPLICATE('=',@col3len) + SPACE(@col4len) + REPLICATE('=',@col5len) + SPACE(@col6len) + REPLICATE('=',@col7len) + SPACE(@col8len) + REPLICATE('=',@col9len) + SPACE(@col10len) + REPLICATE('=',@col11len) + SPACE(@col12len) + REPLICATE('=',@col13len)
--Loop through the permissions for this database and format and print them
DECLARE backupFiles2 CURSOR FOR
SELECT StateDesc,PermName,SchemaName,ObjectName,UserName,ObjectType,UserType FROM #dummyDBPerms ORDER BY Schemaname,ObjectName,UserName
OPEN backupFiles2
-- Loop through all the files for the database
FETCH NEXT FROM backupFiles2 INTO @sd, @pn, @SN, @on, @un, @pd, @ut
WHILE @@FETCH_STATUS = 0
BEGIN
--Set and print the row details for the permissions information
SET @col1nm = SUBSTRING(@sd,1,@sdmax)
SET @col3nm = SUBSTRING(@pn,1,@pnmax)
SET @col5nm = SUBSTRING(@sn,1,@snmax)
SET @col7nm = SUBSTRING(@on,1,@onmax)
SET @col9nm = SUBSTRING(@un,1,@unmax)
SET @col11nm = SUBSTRING(@pd,1,@pdmax)
SET @col13nm = SUBSTRING(@ut,1,@utmax)
--print the detail record for the permissions
if @outputtype = 1
PRINT SPACE(10) + @col1nm + SPACE(@col1len-len(@col1nm)) + SPACE(@col2len) + @col3nm + SPACE(@col3len-len(@col3nm)) + SPACE(@col4len)+ @col5nm + SPACE(@col5len-len(@col5nm)) + SPACE(@col6len)+ @col7nm + SPACE(@col7len-len(@col7nm)) + SPACE(@col8len) + @col9nm + SPACE(@col9len-len(@col9nm)) + SPACE(@col10len) + @col11nm + SPACE(@col11len-len(@col11nm)) + SPACE(@col12len) + @col13nm + SPACE(@col13len-len(@col13nm))
if @outputtype = 2
PRINT @col1nm + ' ' + @col3nm + ' ON [' + @col5nm + '].[' + @col7nm + '] TO [' + @col9nm + '] --ObjectType=' + @col11nm + ' UserType=' + @col13nm
FETCH NEXT FROM backupFiles2 INTO @sd, @pn, @SN, @on, @un, @pd,@ut
END
CLOSE backupFiles2
DEALLOCATE backupFiles2
PRINT ' '
PRINT ' '
END
PRINT '==========================================================================================================='
--Get the next database name and info to use in the database loop
FETCH NEXT FROM backupFiles INTO @DBN, @rm, @cl, @rwd
END
CLOSE backupFiles
DEALLOCATE backupFiles
/* =============================================================================================== */
--Dispose of the temporary tables
DROP TABLE #DummyDBDesc
DROP TABLE #dummyDBRoles
DROP TABLE #dummyDBUsers
DROP TABLE #dummyDBPerms
SET NOCOUNT OFF