SQL Clone
SQLServerCentral is supported by Redgate
 
Log in  ::  Register  ::  Not logged in
 
 
 


How to get the table name from a objectID?


How to get the table name from a objectID?

Author
Message
imran.adam
imran.adam
SSC Journeyman
SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)

Group: General Forum Members
Points: 96 Visits: 115
george sibbald (7/15/2013)
check also the minimum repair level checkdb reports.

If its a non-clustered index that turns out to be corrupted you may be able to just drop and recreate it.

Do you have a clean backup? almost always your best way out of a corruption.


Unfortunately no recent clean backup Sad and ive been i cannot repair as its seriously corrupt

I dont know if its a non-clustered index or table that is corrupted. My strategy as i stated above was to create a new db and script all the objects that are 'good' and not the 'bad' ones. This is why im trying to ascertain the corrupt objects.
george sibbald
george sibbald
SSChampion
SSChampion (10K reputation)SSChampion (10K reputation)SSChampion (10K reputation)SSChampion (10K reputation)SSChampion (10K reputation)SSChampion (10K reputation)SSChampion (10K reputation)SSChampion (10K reputation)

Group: General Forum Members
Points: 10872 Visits: 13687
the checkdb will give you the corrupted object names

---------------------------------------------------------------------
imran.adam
imran.adam
SSC Journeyman
SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)

Group: General Forum Members
Points: 96 Visits: 115
OK, here is the output from the CHECKDB (i cannot see the objectname?)

Msg 8946, Level 16, State 12, Line 2
Table error: Allocation page (1:28502112) has invalid PFS_PAGE page header values. Type is 0. Check type, object ID and page ID on the page.
Msg 8909, Level 16, State 1, Line 1
Table error: Object ID -25000, index ID 0, page ID (1:28502112). The PageId in the page header = (0:0).
Msg 8909, Level 16, State 1, Line 1
Table error: Object ID -25000, index ID 0, page ID (1:28502112). The PageId in the page header = (0:0).
CHECKDB found 1 allocation errors and 1 consistency errors in table '(Object ID -25000)' (object ID -25000).
Msg 8921, Level 16, State 1, Line 1
CHECKTABLE terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
Msg 8998, Level 16, State 1, Line 1
Page errors on the GAM, SGAM, or PFS pages do not allow CHECKALLOC to verify database ID 10 pages from (1:28502112) to (1:28510199). See other errors for cause.
Msg 8998, Level 16, State 1, Line 1
Page errors on the GAM, SGAM, or PFS pages do not allow CHECKALLOC to verify database ID 10 pages from (1:28510200) to (1:28518287). See other errors for cause.
Msg 8998, Level 16, State 1, Line 1
Page errors on the GAM, SGAM, or PFS pages do not allow CHECKALLOC to verify database ID 10 pages from (1:28518288) to (1:28526375). See other errors for cause.
CHECKDB found 3 allocation errors and 0 consistency errors not associated with any single object.
Msg 8909, Level 16, State 1, Line 1
Table error: Object ID 632864, index ID 17051, page ID (1:28510200). The PageId in the page header = (55702:800).
CHECKDB found 1 allocation errors and 0 consistency errors in table '(Object ID 632864)' (object ID 632864).
Msg 8909, Level 16, State 1, Line 1
Table error: Object ID 134676585, index ID 1, page ID (1:28518288). The PageId in the page header = (26880:131072).
CHECKDB found 1 allocation errors and 0 consistency errors in table '(Object ID 134676585)' (object ID 134676585).
CHECKDB found 6 allocation errors and 1 consistency errors in database 'Bon_Live'.
GilaMonster
GilaMonster
SSC Guru
SSC Guru (92K reputation)SSC Guru (92K reputation)SSC Guru (92K reputation)SSC Guru (92K reputation)SSC Guru (92K reputation)SSC Guru (92K reputation)SSC Guru (92K reputation)SSC Guru (92K reputation)

Group: General Forum Members
Points: 92107 Visits: 45285
That is corrupt beyond the point of being able to identify objects. You've got fatal metadata corruption and allocation page corruption.
You're going to be very lucky if you get much at all out of that.

Go through the tables one by one (select name from sysobjects where xtype='U'), see if you can generate the script, see if you can select any of the data. I suspect a good number of objects will fail. It will take quite some time.

May be easier just to go back to the last good backup and accept that everything since is lost.

Gail Shaw
Microsoft Certified Master: SQL Server, MVP, M.Sc (Comp Sci)
SQL In The Wild: Discussions on DB performance with occasional diversions into recoverability

We walk in the dark places no others will enter
We stand on the bridge and no one may pass


imran.adam
imran.adam
SSC Journeyman
SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)SSC Journeyman (96 reputation)

Group: General Forum Members
Points: 96 Visits: 115
GilaMonster (7/15/2013)
That is corrupt beyond the point of being able to identify objects. You've got fatal metadata corruption and allocation page corruption.
You're going to be very lucky if you get much at all out of that.

Go through the tables one by one (select name from sysobjects where xtype='U'), see if you can generate the script, see if you can select any of the data. I suspect a good number of objects will fail. It will take quite some time.

May be easier just to go back to the last good backup and accept that everything since is lost.


Many Thanks Gila!

** NOW JUST NEED THE ADMINS TO MOVE THIS THREAD TO THE SQL 2000 FORUM **
Eric B. Webb
Eric B. Webb
Forum Newbie
Forum Newbie (8 reputation)Forum Newbie (8 reputation)Forum Newbie (8 reputation)Forum Newbie (8 reputation)Forum Newbie (8 reputation)Forum Newbie (8 reputation)Forum Newbie (8 reputation)Forum Newbie (8 reputation)

Group: General Forum Members
Points: 8 Visits: 8
Try this on for size. It will give you the table name base on the object id in the where clause.

SELECT *
FROM sys.objects
WHERE object_id = 632864
GO
--Here's the reverse - to get the Object Id of a known table name. "Department" is the name of the table

SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].department')
GO

You can also use the following code to see if a table exist.

-- this is also good if you need to check is a table exist in SQL
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].department') AND type in (N'U'))
print 'expression is False'
ELSE
PRINT 'expression is TRUE.' ;
Eric M Russell
Eric M Russell
SSChampion
SSChampion (12K reputation)SSChampion (12K reputation)SSChampion (12K reputation)SSChampion (12K reputation)SSChampion (12K reputation)SSChampion (12K reputation)SSChampion (12K reputation)SSChampion (12K reputation)

Group: General Forum Members
Points: 12950 Visits: 10696
It sounds like you have data corruption, but you can also try the following to quickly search for an object_id across a multiple databases.

exec sp_MsForEachDB
'
USE ?;
print ''Searching ... ?''
print ''Found: ''+object_name( 632864 );
';


"The universe is complicated and for the most part beyond your control, but your life is only as complicated as you choose it to be."
Bill Talada
Bill Talada
Ten Centuries
Ten Centuries (1.2K reputation)Ten Centuries (1.2K reputation)Ten Centuries (1.2K reputation)Ten Centuries (1.2K reputation)Ten Centuries (1.2K reputation)Ten Centuries (1.2K reputation)Ten Centuries (1.2K reputation)Ten Centuries (1.2K reputation)

Group: General Forum Members
Points: 1242 Visits: 2001
Not sure if you need the structure or the data; ideally you want both of course. I haven't lost data since a sql server 6.5 bad service pack but here is what I did then:

I've had some success rescuing data by using the non-clustered indexes to retrieve it when the clustered index tree is toast. You just need to be smart enough to write the correct WHERE clause and maybe jump over data pages that are bad. Works in a pinch.
Luis Cazares
Luis Cazares
SSCoach
SSCoach (17K reputation)SSCoach (17K reputation)SSCoach (17K reputation)SSCoach (17K reputation)SSCoach (17K reputation)SSCoach (17K reputation)SSCoach (17K reputation)SSCoach (17K reputation)

Group: General Forum Members
Points: 17474 Visits: 19122
I really hope the OP didn't depend on the last replies. Not because they're bad, but because it's been over 3 years now.


Luis C.
General Disclaimer:
Are you seriously taking the advice and code from someone from the internet without testing it? Do you at least understand it? Or can it easily kill your server?


How to post data/code on a forum to get the best help: Option 1 / Option 2
MMartin1
MMartin1
SSCrazy
SSCrazy (2.9K reputation)SSCrazy (2.9K reputation)SSCrazy (2.9K reputation)SSCrazy (2.9K reputation)SSCrazy (2.9K reputation)SSCrazy (2.9K reputation)SSCrazy (2.9K reputation)SSCrazy (2.9K reputation)

Group: General Forum Members
Points: 2941 Visits: 2031
Luis Cazares (10/12/2016)
I really hope the OP didn't depend on the last replies. Not because they're bad, but because it's been over 3 years now.


I also hope the OP migrated away from SQL Server 2000 and discovered what lead to the massive corruption in the years since.
Though I am curious about one thing, would having log shipping make the data somehow accessible still if one finds themselves in this situation?

----------------------------------------------------
How to post forum questions to get the best help
Go


Permissions

You can't post new topics.
You can't post topic replies.
You can't post new polls.
You can't post replies to polls.
You can't edit your own topics.
You can't delete your own topics.
You can't edit other topics.
You can't delete other topics.
You can't edit your own posts.
You can't edit other posts.
You can't delete your own posts.
You can't delete other posts.
You can't post events.
You can't edit your own events.
You can't edit other events.
You can't delete your own events.
You can't delete other events.
You can't send private messages.
You can't send emails.
You can read topics.
You can't vote in polls.
You can't upload attachments.
You can download attachments.
You can't post HTML code.
You can't edit HTML code.
You can't post IFCode.
You can't post JavaScript.
You can post emoticons.
You can't post or upload images.

Select a forum

































































































































































SQLServerCentral


Search