InstantForum.NET v2.9.0SQLServerCentralhttp://www.sqlservercentral.com/Forums/notifications@sqlservercentral.comTue, 21 May 2013 20:15:45 GMT20http://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxI'm dealing with a similar problem. When I try to deploy reports, I get the following error:Error rsAccessDenied : The permissions granted to user '<MyDomain>\<MyUsername>' are insufficient for performing this operation.I don't get any prompts.UPDATE: I'm designing the reports on the report server. I'm logged in with a domain user account. The SSS service is configured to run using this same domain admin account.After reviewing this lengthy thread ... as well as so many other threads with people experiencing the same problem ... I have to ask: Why the heck is this so difficult? And after reviewing similar threads, I feel like I need a 10-page flow chart to figure out the myriad of permutations of potential solutions that can resolve this problem. Why did Microsoft seemingly go out of their way to make this so hard to set up, troubleshoot, and resolve?!?I'm about to try the steps in this thread ... but I'm not optimistic.UPDATE: Now I can deploy reports but get a permission error when I attempt to execute them from Report Manager. I will start a new thread.Mon, 24 Dec 2012 12:46:49 GMTcgwatershttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxHi akumbabarnsI am glad it worked :-), this topic's documentation is spread across several documents over the internet, it took me about two days to work it out.Mon, 21 May 2012 15:55:05 GMTRock from VbCityhttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxThanks Rock.Been able to go through now.Realised I was using the Report Manager Url (http://dba/Reports_MSSQLSERVER08) instead of the Report Server url (http://dba/ReportServer_MSSQLSERVER08).It has worked perfectly.I really appreciate.Mon, 21 May 2012 09:29:32 GMTakumbabarnshttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxHi akumbabarnsTake a look at the last picture on my previous message, right-click on your project, click on properties and make sure that the [b]TargetServerURL[/b] is [u]http://DBA/ReportServer_MSSQLSERVER08[/u], once you set these parameters you should be able to deploy without entering any credential, and Report Manager should render the [b]Data Sources[/b] and the report objects.You are almost there :-)Mon, 21 May 2012 09:12:51 GMTRock from VbCityhttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxHello Rock,Thank you so much for your time.I've done as directed and it worked well. The Report Manager is working very well now. The only issue left now is with BIDS. It is still repeatedly bringing up the Reporting Services login page even after I fill the correct credentials.See attachment.Mon, 21 May 2012 08:57:07 GMTakumbabarnshttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxHi akumbabarnsI certainly forgot to tell you about IE settings, there are a couple of things you should do.[b]1.[/b] Add your machine's name to the [b]trusted sites[/b] on the [b]Security[/b] tab at the [i]Internet Options[/i][b]2.[/b] Enable [b]Integrated Windows Authentication[/b] on the [b]Advanced[/b] tab at the [i]Internet Options[/i]These settings are at the [b]Internet Options[/b], see the pictures below.[img]http://www.sqlservercentral.com/Forums/Attachment11555.aspx[/img]and[img]http://www.sqlservercentral.com/Forums/Attachment11556.aspx[/img]You should close all your IE sessions and re-start it to see these changes applied.Once you apply these changes you should be able to use IE without running it as Administrator, and you should get all the Report Management buttons as well.[img]http://www.sqlservercentral.com/Forums/Attachment11557.aspx[/img]The Report Management with all its buttons and controls, you wont see the folders as you have to deploy your project to get them, which is the next step below.If you reach this point, "Report Management" with all its controls, the next step is to open your SSRS solution with BIDS, right click on the project name, select properties and change them at described on the picture below.[img]http://www.sqlservercentral.com/Forums/Attachment11558.aspx[/img]It is late here, so I will read your reply tomorrow (6-7 hours from now)Mon, 21 May 2012 08:27:45 GMTRock from VbCityhttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxHello Rock,I did that and still no luck.Please see the attached file.I just tried running Internet Explorer as Administrator (by right-clicking on Internet Explorer and selecting "Run as Administrator) and I inputted the login details and it worked.How do I go about solving this issue so that I don't need to Run IE as Administrator before it works?.Mon, 21 May 2012 08:01:11 GMTakumbabarnshttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxWe are on the same page, let's go with the next step, once you UAC is reset back to its original value (enabled) and you had rebooted the machine, you will start your browser (Internet Explorer, it will be better than anything else at the moment), the you will navigate to your Report Manager by entering its URL, I expect it to be something like: [b]http://DBA/Reports[/b] (I am not sure is you are using an instance name.Now the attached picture show the behavior on my laptop, I get a login screen where I enter my account (without the 'domain' or 'machine' name) and password (I dealt with this issue last week, so, I haven't tried to get rid of this password yet); notice that I drew an arrow to the 'DOMAIN', which is your case, the expected value should be DBA.After you enter your login credentials, the [b]Report Manager[/b] should show you the 'administration' controls, please let us know.[img]http://www.sqlservercentral.com/Forums/Attachment11552.aspx[/img]Mon, 21 May 2012 06:23:53 GMTRock from VbCityhttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxHello Rock,DBA is my computer Name.Mon, 21 May 2012 06:04:37 GMTakumbabarnshttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxHi akumbabarnsIs DBA the domain your account is assigned to? it should be the same, it is the same domain you are assigned when login to your workstation; let me explain my environment, it is a laptop with MS SQL 2008 installed, my laptop name is jupiter, and it turned to be the domain I should be using, although I have a local area network, with a different domain name.If you are unable to access the Report Manager once UAC is re-enabled, then you should try to use the machine name instead of the DBA.Mon, 21 May 2012 05:56:40 GMTRock from VbCityhttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxHello Rock,Just tried the steps as u directed.See attached screen shots.But after re-enabling the UAC settings and restarting the system, report manager doesn't display the Content and Properties tabs anylonger.Mon, 21 May 2012 05:44:29 GMTakumbabarnshttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxThat's very good akumbabarnsOnce you are at the [b]Report Manager[/b] with UAC [b]disabled[/b] you have to change its settings to add your account as a [b][i]Content Manager[/i][/b] [b][i]System Administrator[/i][/b] and [b][i]System User[/i][/b]You will do that in two stages:[b]1.[/b] Clicking on the [b]Properties[/b] tab (on the left of the screen, under the Home folder)[b]2.[/b] Clicking on the [b]Site Settings[/b] link (top-right of the screen)[b]Properties[/b]Here, you assign your account as a [b]Context Manager[/b]You should enter your account as DOMAIN/login (look at the attached picture)[b]Site Settings[/b]Here you assign your account as: [b][i]System Administrator[/i][/b] and [b][i]System User[/i][/b]You should enter your account as DOMAIN/login (look at the attached picture)- o -Once you complete these configurations, reset the UAC as it was, then reboot the machine, once the machine is back you should be able to access the Report Manager by login with your account and password, you should be able to get a Report Manager with all the admin controls, as they appear at the top of the attached image.- o -The attached picture, contains 3 areas; the top is the Report Manager, its middle is the screen you will get when assigning your account to the Context Manager, the bottom is when you assign your account to the System Administrator and System User.Let us know the outcome to move to the next section of the procedure.Hope this helps,Rock from VbCity.Mon, 21 May 2012 04:49:52 GMTRock from VbCityhttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxHello Rock,After disabling UAC, I was able to login to Report Manager. It displayed all the required content. But after I re-enabled it, it didn't display the content again.Mon, 21 May 2012 03:12:01 GMTakumbabarnshttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxPlease tell us what happens after you disabled UAC, Where you able to login into [b]Report Manager[/b]? Did it show you the [b]Contents[/b] and [b]Properties[/b] tabs?It is a long procedure, and the step about disabling UAC and accessing [b]Report Manager[/b] is the most important, that will be the first step in troubleshooting your issue.Hope this helpsSun, 20 May 2012 15:41:58 GMTRock from VbCityhttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxHello,I still have some issues with this.I realized that after resetting the UAC settings to the default value, the problem persists.I also realized that I still can't Deploy with BIDS since the login prompt is still there. I have reverted to using the Report Manager to upload reports that I've designed in BIDS. Since that is possible and easy.Will appreciate your usual assistanc.Sun, 20 May 2012 09:51:07 GMTakumbabarnshttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxTHANKS MAN.You made my day.:satisfied:Sat, 19 May 2012 07:28:23 GMTakumbabarnshttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxHi akumbabarnsI had a similar problem early this week on a freshly installed SSRS 2008 on my development laptop (Windows 7); I will explain the steps I did to resolve my issue.[li]Open [b]Reporting Services Configuration Manager[/b][/li][ul]Service Account [b]Local System[/b]Report Manager: [b]http://localhost:80/Reports_InstanceName[/b]Close [b]Reporting Services Configuration Manager[/b]We were reviewing the parameters we will need later[/ul][li]Disable [b]User Account Control Setting[/b][/li][ul]Click on the [b]Start[/b] buttonType [b]UAC[/b] on the [i]Search program and files[/i]Click on [b]User Account Control Setting[/b] optionPull the lever down to [b]Never Notify[/b]Reboot your workstationWe will reset the UAC setting once we finish the whole procedure[/ul][li]Configuring [b]Report Manager[/b][/li][ul]Start your browser [b]Internet Explorer[/b]Type in your Report Manager URL (the one identified on the first block of this procedure)The Report Manager now renders the Home folder with the [b]Contents[/b] and [b]Properties[/b] tabsClick on the [b]Properties[/b] tab.Click on the [b]New Role Assignment[/b] buttonAssign your account [i]domain/user_name[/i] to the [b]Content Manager[/b] role.Click on the [b]Ok[/b] button to save the new user-roleClick on the [b][u]Site Settings[/u][/b] link located at the top-right of the browser's windowClick on its [b]Security[/b] option located on the left paneAdd yourself to the [i]System Administrator[/i] and [i]System User[/i] roles.Click on the [b]Ok[/b] button to save the changesClose the browser[/ul] [li]Enable [b]User Account Control Setting[/b][/li][ul]Click on the [b]Start[/b] buttonType [b]UAC[/b] on the [i]Search program and files[/i]Click on [b]User Account Control Setting[/b] optionPull the lever to the same position it has before.[/b]Reboot your workstation[/ul][li]Open [b]BIDS[/b] and [b]your project[/b][/li][ul]On the solution explorer, [b]right-click[/b] on your project nodeClick on the [b]Properties[/b] nodeEnter the name for the [b]TargetDataSourceFolder[/b]Enter the name for the [b]TargetReportFolder[/b]Enter the target server URL [b]http://localhost/ReportServer_InstanceName[/b]It is up to you to set the property [b]OverwriteDataSources[/b] to [b]true[/b] or [b]false[/b]Click on the [b]Ok[/b] button to close the properties window.[/ul]That's it, you should be able to deploy your reports to your local report server.You will need to enter your login credential when accessing the Report Manager via the browser.Hope this helps.ArnaldoFri, 18 May 2012 22:44:03 GMTRock from VbCityhttp://www.sqlservercentral.com/Forums/Topic1302539-1632-1.aspxI am new to SSRS. Been able to design a report using BIDS. When I try to deploy the report using BIDS, the reporting servics login screen keeps prompting for a username and password.Various attempts to connect using various login credentials failed and the screen persists.I also tried to use the report manager but it only displays a blank screen without the needed options.Attempt to use the Report Server url displays the following error:"The permissions granted to user 'DBA\Barns' are insufficient for performing this operation. (rsAccessDenied)"My report server service account is "Network Service".I'll appreciate any urgent help.Regards Fri, 18 May 2012 07:56:49 GMTakumbabarns